SNS Insider Black Friday Offer
Combat Helmet Market

Combat Helmet Market by Application(Law Enforcement, Military & Defense), by Weight (Up to3 lbs,Over3lbs), by Material (Original Aramid Fiber Kevlar,Advanced Aramid Fiber,UHMWPE Fiber), by Type(Lightweight Helmet, Modular Integrated Communications Helmet, Enhanced Combat Helmet), by Regions and Global Forecast 2022-2028

Report Id: SNS/A&D/2078 | June 2022 | Region: Global | 125 Pages

Report Scope & Overview:

Combat Helmet Market Size was valued at USD XX billion in 2021 and US$ XX billion in 2022, expected to reach USD XX billion by 2028, and grow at a CAGR of  6.5% over the forecast period 2022-2028.

A combat helmet is a type of personal Armour that is specifically designed to protect the soldier's head during conflict. Combat helmets first appeared many years ago and have evolved with advancements in material and application. Defense troops wear advanced battle helmets to protect their heads from bullets and other dangerous objects. Many nations' defence departments are continually investing in R&D operations to improve the performance of combat helmets by improving design, material quality, manufacturing technique, and other factors. As a result, the worldwide combat helmets market is likely to expand over the forecast period.

MARKET DYNAMICS:

KEY DRIVERS: 

  • Increasing Cross-Border Conflicts

  • Increased Defense Spending

RESTRAINTS:

  • Combat Helmets Are Expensive

  • Analysis of Restriction Impact

CHALLENGES:

  • This part will be covered in final report.

OPPORTUNITIES:

  • Military Helmet Technological Advancements

THE IMPACT OF COVID-19

The current forecast for the global market of helmets to 2028 is expected to be lower than the previous COVID-19 estimates. The epidemic has had a devastating effect on the global defense industry. In the defense industry, due to declining tax revenues by declining GDP, it is also expected to reduce the need for new military aircraft, naval vessels, submarines, related systems, and military equipment in the next few years. This is also expected to reduce the need for combat helmets.

Many governments around the world are focused on controlling the COVID-19 outbreak in their countries. Therefore, they invest heavily in health care and vaccine development. Therefore, the cost of protection for new products is expected to decrease over the next few years. The cost of protection is expected to increase gradually during the forecast period after the end of the epidemic.

The protection segment held the most market share and is predicted to grow at the fastest rate during the research period. The primary purpose of combat helmets is to protect soldiers. As a result, the use of combat helmets for protection accounts for the majority of the market share in During the forecast period, this segment is expected to have the greatest CAGR. During the projected period, the development of combat helmets connected with communication systems is expected to have a beneficial impact on market growth. Furthermore, demand for these helmets has been increasing in recent years.

Technology is important in preserving a country's military capability. This is accomplished by continuous updating of military equipment by R&D teams focused on attaining maximum efficiency with least resource waste. Combat helmets have evolved significantly in the global market, from providing merely heat protection to being capable of resisting bullet strikes. This is accomplished by modifying the material and production process and using new technology. Furthermore, hybridization procedures provide battle helmets made of fibre composites that are strong enough to withstand ballistic attacks. Furthermore, such technical advancements are expected to improve the performance of combat helmets.

MARKET KEY PLAYER

Morgan Advanced Materials, Revision Military, 3M, Point Blank Enterprises Inc, DuPont, Armor Source LLC, BAE Systems, GENTEX CORPORATION, MKU Limited, Honeywell International Inc, and other players.

MARKET SEGMENT:

by Application

  • Law Enforcement

  • Military & Defense

by Weight 

  • Up to3 lbs

  • Over3lbs

by Material 

  • Original Aramid Fiber Kevlar

  • Advanced Aramid Fiber

  • UHMWPE Fiber

by Type

  • Lightweight Helmet

  • Modular Integrated Communications Helmet

  • Enhanced Combat Helmet

Combat Helmet Market Segment Chart

REGIONAL ANALYSIS

Due to increased defence spending in key economies, the Asia-Pacific market is expected to develop the quickest during the forecasted period. Due to increased investments in combat helmets, key countries such as China, Japan, India, and Australia are considerably driving regional market growth. Increasing military spending and escalating territorial conflicts among neighbouring countries such as China, South Korea, and North Korea are propelling the region's combat helmet industry. Furthermore, military spending in India increased during the anticipated period. Furthermore, China, India, and other Asian countries' military modernization initiatives and increased development of army equipment are boosting the regional market's growth.

REGIONAL COVERAGE:

  • North America

    • USA

    • Canada

    • Mexico

  • Europe

    • Germany

    • UK

    • France

    • Italy

    • Spain

    • The Netherlands

    • Rest of Europe

  • Asia-Pacific

    • Japan

    • south Korea

    • China

    • India

    • Australia

    • Rest of Asia-Pacific

  • The Middle East & Africa

    • Israel

    • UAE

    • South Africa

    • Rest of Middle East & Africa

  • Latin America

    • Brazil

    • Argentina

    • Rest of Latin America

Combat Helmet Market Report Scope:
Report Attributes Details
Market Size in 2021 US$ XX Billion
Market Size by 2028 US$ XX Billion
CAGR CAGR of 6.5% From 2022 to 2028
Base Year 2021
Forecast Period 2022-2028
Historical Data 2017-2020
Report Scope & Coverage Market Size, Segments Analysis, Competitive  Landscape, Regional Analysis, DROC & SWOT Analysis, Forecast Outlook
Key Segments • By Application(Law Enforcement, Military & Defense)
• By Weight (Up to3 lbs,Over3lbs)
• By Material (Original Aramid Fiber Kevlar,Advanced Aramid Fiber,UHMWPE Fiber)
• By Type(Lightweight Helmet, Modular Integrated Communications Helmet, Enhanced Combat Helmet)
Regional Analysis/Coverage North America (USA, Canada, Mexico), Europe
(Germany, UK, France, Italy, Spain, Netherlands,
Rest of Europe), Asia-Pacific (Japan, South Korea,
China, India, Australia, Rest of Asia-Pacific), The
Middle East & Africa (Israel, UAE, South Africa,
Rest of Middle East & Africa), Latin America (Brazil, Argentina, Rest of Latin America)
Company Profiles Morgan Advanced Materials, Revision Military, 3M, Point Blank Enterprises Inc, DuPont, Armor Source LLC, BAE Systems, GENTEX CORPORATION, MKU Limited, Honeywell International Inc, and other players.
DRIVERS • Increasing Cross-Border Conflicts
• Increased Defense Spending
RESTRAINTS • Combat Helmets Are Expensive
• Analysis of Restriction Impact


Frequently Asked Questions (FAQ) :

The current forecast for the global market of helmets to 2028 is expected to be lower than the previous COVID-19 estimates. The epidemic has had a devastating effect on the global defense industry.

Combat Helmets Are Expensive and Analysis of Restriction Impact

The sample for the Combat Helmet Market report is available on the website upon request. To obtain the sample report, you can also use the 24*7 chat support and direct call services.

Manufacturers/Service provider, Consultant, Association, Research institute, private and universities libraries, Suppliers and Distributors of the product. 

Yes, this report cover top down , bottom up Quantitative Research. Qualitative Research, Fundamental Research, data triangulation, ID’s & FGD’s  Analytical research, And other as per report requirement.


Table of Content:

 

1. Introduction

1.1 Market Definition

1.2 Scope

1.3 Research Assumptions

 

2. Research Methodology

 

3. Market Dynamics

3.1 Drivers

3.2 Restraints

3.3 Opportunities

3.4 Challenges

 

4. Impact Analysis

4.1 COVID 19 Impact Analysis

 

5. Value Chain Analysis

 

6. Porter’s 5 forces model

 

7.  PEST Analysis

 

8.Combat Helmet Market, by Application

8.1 Law Enforcement

8.2 Military&Defense

 

9.Combat Helmet Market, by Weight

9.1 Up to3 lbs

9.2 Over3lbs

 

10.Combat Helmet Market, by Material

10.1 Original Aramid Fiber Kevlar

10.2 Advanced Aramid Fiber

10.3 UHMWPE Fiber

 

11.Combat Helmet Market, by Type

11.1 Lightweight Helmet

11.2 Modular Integrated Communications Helmet

11.3 Enhanced Combat Helmet

 

12. Regional Analysis

12.1 Introduction

12.2 North America

12.2.1 USA

12.2.2 Canada

12.2.3 Mexico

12.3 Europe

12.3.1 Germany

12.3.2 UK

12.3.3 France

12.3.4 Italy

12.3.5 Spain

12.3.6 The Netherlands

12.3.7 Rest of Europe

12.4 Asia-Pacific

12.4.1 Japan

12.4.2 South Korea

12.4.3 China

12.4.4 India

12.4.5 Australia

12.4.6 Rest of Asia-Pacific

12.5 The Middle East & Africa

12.5.1 Israel

12.5.2 UAE

12.5.3 South Africa

12.5.4 Rest

12.6 Latin America

12.6.1 Brazil

12.6.2 Argentina

12.6.3 Rest of Latin America

13.Company Profiles

13.1 GENTEX CORPORATION

13.1.1 Financial

13.1.2 Products/ Services Offered

13.1.3 SWOT Analysis

13.1.4 The SNS view

 

13.2 Morgan Advanced Materials

13.3 Revision Military

13.4 Honeywell International Inc

13.5 Point Blank Enterprises Inc

13.6 DuPont

13.7 ArmorSource LLC

13.8 BAE Systems

13.9 3M

13.10 MKU Limited

 

14. Competitive Landscape

14.1 Competitive Benchmarking

14.2 Market Share analysis

14.3 Recent Developments

 

15. Conclusion

 

 

An accurate research report requires proper strategizing as well as implementation. There are multiple factors involved in the completion of good and accurate research report and selecting the best methodology to compete the research is the toughest part. Since the research reports we provide play a crucial role in any company’s decision-making process, therefore we at SNS Insider always believe that we should choose the best method which gives us results closer to reality. This allows us to reach at a stage wherein we can provide our clients best and accurate investment to output ratio.

Each report that we prepare takes a timeframe of 350-400 business hours for production. Starting from the selection of titles through a couple of in-depth brain storming session to the final QC process before uploading our titles on our website we dedicate around 350 working hours. The titles are selected based on their current market cap and the foreseen CAGR and growth.

 

The 5 steps process:

Step 1: Secondary Research:

Secondary Research or Desk Research is as the name suggests is a research process wherein, we collect data through the readily available information. In this process we use various paid and unpaid databases which our team has access to and gather data through the same. This includes examining of listed companies’ annual reports, Journals, SEC filling etc. Apart from this our team has access to various associations across the globe across different industries. Lastly, we have exchange relationships with various university as well as individual libraries.

Secondary Research

Step 2: Primary Research

When we talk about primary research, it is a type of study in which the researchers collect relevant data samples directly, rather than relying on previously collected data.  This type of research is focused on gaining content specific facts that can be sued to solve specific problems. Since the collected data is fresh and first hand therefore it makes the study more accurate and genuine.

We at SNS Insider have divided Primary Research into 2 parts.

Part 1 wherein we interview the KOLs of major players as well as the upcoming ones across various geographic regions. This allows us to have their view over the market scenario and acts as an important tool to come closer to the accurate market numbers. As many as 45 paid and unpaid primary interviews are taken from both the demand and supply side of the industry to make sure we land at an accurate judgement and analysis of the market.

This step involves the triangulation of data wherein our team analyses the interview transcripts, online survey responses and observation of on filed participants. The below mentioned chart should give a better understanding of the part 1 of the primary interview.

Part 2: In this part of primary research the data collected via secondary research and the part 1 of the primary research is validated with the interviews from individual consultants and subject matter experts.

Consultants are those set of people who have at least 12 years of experience and expertise within the industry whereas Subject Matter Experts are those with at least 15 years of experience behind their back within the same space. The data with the help of two main processes i.e., FGDs (Focused Group Discussions) and IDs (Individual Discussions). This gives us a 3rd party nonbiased primary view of the market scenario making it a more dependable one while collation of the data pointers.

Step 3: Data Bank Validation

Once all the information is collected via primary and secondary sources, we run that information for data validation. At our intelligence centre our research heads track a lot of information related to the market which includes the quarterly reports, the daily stock prices, and other relevant information. Our data bank server gets updated every fortnight and that is how the information which we collected using our primary and secondary information is revalidated in real time.

Step 4: QA/QC Process

After all the data collection and validation our team does a final level of quality check and quality assurance to get rid of any unwanted or undesired mistakes. This might include but not limited to getting rid of the any typos, duplication of numbers or missing of any important information. The people involved in this process include technical content writers, research heads and graphics people. Once this process is completed the title gets uploader on our platform for our clients to read it.

Step 5: Final QC/QA Process:

This is the last process and comes when the client has ordered the study. In this process a final QA/QC is done before the study is emailed to the client. Since we believe in giving our clients a good experience of our research studies, therefore, to make sure that we do not lack at our end in any way humanly possible we do a final round of quality check and then dispatch the study to the client.