SNS Insider Black Friday Offer
Cone Beam Computed Tomography Market

Cone Beam Computed Tomography Market Size, Share & Segmentation by Application (Dental Implantology, Oral and Maxillofacial Surgery, Orthodontics, Endodontics, General Dentistry, Temporomandibular Joint (TMJ) Disorders, Periodontics, Forensic Dentistry), by Patient Position (Standing Position, Seated Position, Supine Position), by End-Use (Hospitals & Others, Dental Clinics), by Regions | Global Market Forecast 2022-2028

Report Id: SNS/HC/1025 | May 2022 | Region: Global | 125 Pages

Report Scope & Overview:

The Cone Beam Computer Tomography Market Size was valued at USD 432.38 million in 2021, and is expected to reach USD 994.8 million by 2028, and grow at a CAGR of 11.9% over the forecast period 2022-2028. Cone beam computer tomography (CBCT) advanced innovation has emphatically affected the act of dental medical procedures. Mechanical headways, particularly in the field of advanced imaging frameworks, have essentially expanded the degree of itemized data accessible to mind suppliers, while likewise alleviating patient openness to radiation levels. With CBCT methods, dental wellbeing experts have acquired the capacity to gather more information with lower radiation dosages. Prior doctors depended on 2-layered imaging for the motivations behind conclusion and treatment arranging. In any case, 2-D innovation frequently requires various radiation openness. Consequently, three-dimensional filtering is acquiring notoriety for diagnostics.

Cone Beam Computer Tomography Market

Ascend in the geriatric populace, wide scope of utilizations of CBCT frameworks in dental practice, and upsurge in number of patients experiencing dental sicknesses are supposed to drive the market development.

Market Dynamics

Drivers

  • Expanding pervasiveness of dental issues,

  • Development in geriatric populace

  • Developing interest for corrective dentistry

  • Extending uses of CBCT system

Restraints

  • Some countries have low medical facilities.

Challenges

  • High in cost

Opportunities

  • Low radiation openness when contrasted with customary simple X-beams

Impact of COVID-19

The COVID-19 pandemic significantly affected the advanced imaging market, particularly in the underlying stages, as the imaging rehearses were shut as a preparatory rule. The severe social removing rules meaningfully affect dental consideration practices and imaging systems. According to the American Dental Association's Health Policy Institute (HPI), the dental administrations were considered just crisis cases in the beginning phase of the pandemic. As indicated by the American Dental Association (ADA), the dental methods that should have been deferred included dental X-beam techniques. Albeit the quantity of cone pillar CT systems was diminished, CBCT was utilized in the early discovery of COVID-19 in malignant growth patients. Disease patients address a weak populace during the pandemic. Chest CT assumes a pivotal part in the finding of COVID-19 pneumonia. Disease patients profiting from radiation treatment need to go through everyday CBCT for picture-directed radiation treatment.

Market Estimation

Global cone beam computer tomography market size was esteemed at USD 432.3816 million every 2021 and is supposed to extend at a CAGR of 11.9% from 2022 to 2028. and it is estimated to reach 994.8 million by 2028.

Market Segmentation:

By Application

  • Dental Implantology

  • Oral and Maxillofacial Surgery

  • Orthodontics

  • Endodontics

  • General Dentistry

  • Temporomandibular Joint (TMJ) Disorders

  • Periodontics

  • Forensic Dentistry

  • Others

By Patient Position

  • Standing Position

  • Seated Position

  • Supine Position

By End-Use

  • Hospitals & Others

  • Dental Clinics

Cone Beam Computer Tomography Market

Key Players

Dentsply Sirona, Vatech Co., Ltd,  Carestream Health Inc. (Onex Corporation), Curve Beam LLC,  Danaher Corporation,  J. Morita Mfg. Corp, and Other players.

Regional Analysis

North America held the biggest portion of over 45.0% because of the variables like preventive methodology towards dental consideration and cleanliness, openness to autonomous centers, and rising R&D exercises in advanced imaging. The U.S. government financing for Medicare and Medicaid is expected to drive the interest for computerized imaging in dental consideration as the need might arise to pay less costs using cash on hand.

Asia Pacific is supposed to observe the quickest development over the conjecture time frame relating to the rising number of centers, developing R&D in assembling, and rising mindfulness about dental consideration. In the Asia Pacific, the medical services framework is extending with mechanical progressions. Different legislatures of nations, including India and China, are acquainting drives to spread mindfulness about oral consideration and cleanliness.

REGIONAL COVERAGE:

North America

  • USA

  • Canada

  • Mexico

Europe

  • Germany

  • UK

  • France

  • Italy

  • Spain

  • The Netherlands

  • Rest of Europe

Asia-Pacific

  • Japan

  • south Korea

  • China

  • India

  • Australia

  • Rest of Asia-Pacific

The Middle East & Africa

  • Israel

  • UAE

  • South Africa

  • Rest of Middle East & Africa

Latin America

  • Brazil

  • Argentina

  • Rest of Latin America

 

Cone Beam Computer Tomography Market Report Scope:
Report Attributes Details
Market Size in 2021 US$ 432.38 Million
Market Size by 2028 US$ 994.8 Million
CAGR CAGR of 11.9% From 2022 to 2028
Base Year 2021
Forecast Period 2022-2028
Historical Data 2017-2020
Report Scope & Coverage Market Size, Segments Analysis, Competitive  Landscape, Regional Analysis, DROC & SWOT Analysis, Forecast Outlook
Key Segments • By Application (Dental Implantology, Oral and Maxillofacial Surgery, Orthodontics, Endodontics, General Dentistry, Temporomandibular Joint (TMJ) Disorders, Periodontics, Forensic Dentistry)
• By Patient Position (Standing Position, Seated Position, Supine Position)
• By End-Use (Hospitals & Others, Dental Clinics)
Regional Analysis/Coverage North America (USA, Canada, Mexico), Europe
(Germany, UK, France, Italy, Spain, Netherlands,
Rest of Europe), Asia-Pacific (Japan, South Korea,
China, India, Australia, Rest of Asia-Pacific), The
Middle East & Africa (Israel, UAE, South Africa,
Rest of Middle East & Africa), Latin America (Brazil, Argentina, Rest of Latin America)
Company Profiles Dentsply Sirona, Vatech Co., Ltd,  Carestream Health Inc. (Onex Corporation), Curve Beam LLC,  Danaher Corporation,  J. Morita Mfg. Corp
DRIVING FACTORS • Expanding pervasiveness of dental issues,
• Development in geriatric populace
• Developing interest for corrective dentistry
Restraints • Some countries have low medical facilities.


Frequently Asked Questions (FAQ) :

Cone Beam Computer Tomography Market Size was valued at USD 432.38 million in 2021, and is expected to reach USD994.8 million by 2028, and grow at a CAGR of 11.9% over the forecast period 2022-2028.

Key drivers of the Cone Beam Computed Tomography Market are Expanding the pervasiveness of dental issues, and Development in the geriatric populace.

Standing Position, Seated Position, and Supine Position are the sub-segments of by product type.

Secondary research methodology is studied in this report.

Top-down, bottom-up, Quantitative, Qualitative Research, Descriptive, Analytical, Applied, and Fundamental Research.


Table of Contents

 

1. Introduction

1.1 Market Definition

1.2 Scope

1.3 Research Assumptions

 

2. Research Methodology

 

3. Market Dynamics

3.1 Drivers

3.2 Restraints

3.3 Opportunities

3.4 Challenges

 

4. Impact Analysis

4.1 COVID 19 Impact Analysis

 

5. Value Chain Analysis

 

6. Porter’s 5 forces model

 

7.  PEST Analysis

 

8 Global Cone Beam Computed Tomography Market Segmentation, by Application

8.1 Dental Implantology

8.2 Oral and Maxillofacial Surgery

8.3 Orthodontics

8.4 Endodontics

8.5 General Dentistry

8.6 Temporo mandibular Joint (TMJ) Disorders

8.7 Periodontics

8.8 Forensic Dentistry

8.8 Others

 

9 Global Cone Beam Computed Tomography Market Segmentation, by Patient Position

9.1 Standing Position

9.2 Seated Position

9.3 Supine Position

 

10 Global Cone Beam Computed Tomography Market Segmentation, By End-use

10.1 Hospitals & Others

10.2 Dental Clinics

 

11 Regional Analysis

11.1 Introduction

11.2 North America

11.2.1 USA

11.2.2 Canada

11.2.3 Mexico

11.3        Europe

11.3.1 Germany

11.3.2 UK

11.3.3 France

11.3.4 Italy

11.3.5 Spain

11.3.6 The Netherlands

11.3.7 Rest of Europe

11.4        Asia-Pacific

11.4.1 Japan

11.4.2 South Korea

11.4.3 China

11.4.4 India

11.4.5 Australia

11.4.6 Rest of Asia-Pacific

11.5        The Middle East & Africa

11.5.1 Israel

11.5.2 UAE

11.5.3 South Africa

11.5.4 Rest

11.6        Latin America

11.6.1 Brazil

11.6.2 Argentina

11.6.3 Rest of Latin America

 

12 Company Profiles

12.1 Dentsply Sirona

12.1.1 Financial

12.1.2 Products/ Services Offered

12.1.3 SWOT Analysis

12.1.4 The SNS view

12.2 Dentsply Sirona

12.3 Vatech Co., Ltd.

12.4 Carestream Health Inc. (Onex Corporation)

12.5 Curve Beam LLC

12.6 Danaher Corporation

12.7 J. Morita Mfg. Corp

 

13 Competitive Landscape

13.1 Competitive Benchmark

13.2 Market Share analysis

13.3 Recent Developments

 

14 Conclusion

 

An accurate research report requires proper strategizing as well as implementation. There are multiple factors involved in the completion of a good and accurate research report and selecting the best methodology to complete the research is the toughest part. Since the research reports, we provide play a crucial role in any company’s decision-making process, therefore we at SNS Insider always believe that we should choose the best method which gives us results closer to reality. This allows us to reach a stage wherein we can provide our clients best and most accurate investment to output ratio.

Each report that we prepare takes a timeframe of 350-400 business hours for production. Starting from the selection of titles through a couple of in-depth brainstorming sessions to the final QC process before uploading our titles on our website we dedicate around 350 working hours. The titles are selected based on their current market cap and the foreseen CAGR and growth.

 

The 5 steps process:

Step 1: Secondary Research:

Secondary Research or Desk Research as the name suggests is a research process wherein, we collect data through readily available information. In this process, we use various paid and unpaid databases to which our team has access and gather data through the same. This includes examining listed companies’ annual reports, Journals, SEC filling, etc. Apart from this, our team has access to various associations across the globe across different industries. Lastly, we have exchange relationships with various universities as well as individual libraries.

Secondary Research

Step 2: Primary Research

When we talk about primary research, it is a type of study in which the researchers collect relevant data samples directly, rather than relying on previously collected data.  This type of research is focused on gaining content-specific facts that can be sued to solve specific problems. Since the collected data is fresh and first-hand therefore it makes the study more accurate and genuine.

We at SNS Insider have divided Primary Research into 2 parts.

Part 1 wherein we interview the KOLs of major players as well as the upcoming ones across various geographic regions. This allows us to have their view over the market scenario and acts as an important tool to come closer to accurate market numbers. As many as 45 paid and unpaid primary interviews are taken from both the demand and supply sides of the industry to make sure we land an accurate judgment and analysis of the market.

This step involves the triangulation of data wherein our team analyses the interview transcripts, online survey responses, and observation of on-field participants. The below-mentioned chart should give a better understanding of part 1 of the primary interview.

Part 2: In this part of the primary research the data collected via secondary research and part 1 of the primary research is validated with the interviews with individual consultants and subject matter experts.

Consultants are those set of people who have at least 12 years of experience and expertise within the industry whereas Subject Matter Experts are those with at least 15 years of experience behind their back within the same space. The data with the help of two main processes i.e., FGDs (Focused Group Discussions) and IDs (Individual Discussions). This gives us a 3rd party nonbiased primary view of the market scenario making it a more dependable one while collation of the data pointers.

Step 3: Data Bank Validation

Once all the information is collected via primary and secondary sources, we run that information for data validation. At our intelligence center, our research heads track a lot of information related to the market which includes the quarterly reports, the daily stock prices, and other relevant information. Our data bank server gets updated every fortnight and that is how the information which we collected using our primary and secondary information is revalidated in real-time.

Step 4: QA/QC Process

After all the data collection and validation our team does a final level of quality check and quality assurance to get rid of any unwanted or undesired mistakes. This might include but is not limited to getting rid of the many typos, duplication of numbers, or missing any important information. The people involved in this process include technical content writers, research heads, and graphics people. Once this process is completed the title gets uploaded on our platform for our clients to read it.

Step 5: Final QC/QA Process:

This is the last process and comes when the client has ordered the study. In this process a final QA/QC is done before the study is emailed to the client. Since we believe in giving our clients a good experience of our research studies, therefore, to make sure that we do not lack at our end in any way humanly possible we do a final round of quality check and then dispatch the study to the client.